* feat(scripts): add terminal script automation, recording, and side panel
Introduce nct script runtime in the main process with terminal-side recording,
execution overlay, Monaco editor, connect-script queues, and scripts side panel
integration. Fix recording to wire scriptRecorderRef into xterm, use waitForPrompt
for root/user shells, and save recorded scripts through the global editor dialog.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): address Bugbot review findings for recording and side panel
Refresh script run state in side panel memo, guard toolbar recording against
multi-session conflicts, reset connect scripts on reconnect, resolve focused
session via getActiveTerminalSessionId, and avoid wiping host edit form when
snippets list updates.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): prevent pending script re-run and improve workspace run feedback
Track one-shot pendingScript execution separately from onConnect queue so
reconnects do not replay Run-now scripts. Fall back to focused session when
running on all tabs outside a workspace, and toast when every tab is still
connecting.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): consume connect-script window once and filter serial hosts
Mark the onConnect script evaluation as consumed even when the queue is
empty so later snippet/host edits do not rerun automation mid-session.
Restore serial-host filtering in SelectHostPanel confirm handler.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): grace period before giving up on connect-script queue
Only mark onConnect automation as consumed after scripts run or a short
post-connect grace window expires, so late-loading snippets still trigger
while mid-session Vault edits do not.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): gate connect-script consumption on vault hydration
Replace the grace timer with vault-init and unresolved host script binding
checks so late-loading snippets still run onConnect automation while
mid-session edits stay suppressed. Clear pending script run state on
disconnect so reconnect retries workspace pending scripts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): honor run targets and retry failed connect automation
Route QuickScriptEditorDialog Run through onRunSnippet for multi-host
workspaces. Defer connect/pending script completion markers until each
script succeeds and retry the queue after failures.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): stabilize pending runs and global connect queue sync
Keep pending script run state across reconnects, run onConnect scripts
before one-shot workspace pending scripts, and strip per-host queue entries
when an onConnect script targets all hosts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): defer host queue snippet sync and guard connect runs
Persist snippet target links only when the host panel is saved, block
duplicate connect-script scheduling while a batch is running, and require
runnable hosts before showing Run in the snippets editor footer.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): retry connect failures and surface output-trigger errors
Use a retry tick in connect-script effect deps, toast automation failures
from output triggers, and require runnable hosts before QuickScript Run.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): track id-less pending runs and re-arm output triggers
Remember anonymous pendingScript objects after first run and allow
onOutput triggers to fire again when new terminal output arrives.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): unblock paused connect runs and pass session meta
Resolve waitForScriptRun on pause, run workspace scripts per session
with hostname context, defer output-trigger arming until runs start, and
add noRunnableHosts i18n for QuickScript Run.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): serialize output triggers and defer empty connect finalize
Fire at most one onOutput trigger per scan while a run is active, and
only finalize an empty connect queue after vault snippets are loaded.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): guard output launch race and script run waits
Block overlapping onOutput launches, timeout stuck waitForScriptRun
promises, and disable vault Run when no connectable targets exist.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): match output triggers on new chunks only
Scan onOutput patterns against recent terminal output instead of buffer
length dedupe, and restore overflow-visible on SelectHostPanel new-host flow.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): await sequential workspace runs and output launch
Wait for each tab script to finish in sequential workspace mode, and hold
output-trigger launch guard until the session run becomes active.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): wait through pause and hold output trigger until done
Keep connect and sequential workspace queues blocked until scripts
complete or fail, and retain output-trigger guard until the launched run
finishes.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): harden output trigger wait helpers
Add explicit timeouts to output-trigger wait helpers and stop rescanning
the buffer after script completion to avoid sticky-match rerun loops.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): allow empty connect queue and match output in new chunks
Treat an empty connectScriptIds array as an explicit cleared queue instead
of re-migrating from snippet targets, and only fire onOutput triggers when
the latest terminal output contains the pattern.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): require fresh output overlap for onOutput triggers
Only fire output-matched scripts when the regex match extends into the
latest terminal chunk, preventing reruns from stale buffer text.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): promote manual scripts added to host connect queue
Diff connect queue changes from raw connectScriptIds so saving a host
updates manual scripts to onConnect when they are newly queued.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): dedupe output triggers by match position
Track the buffer end offset of each output trigger match and ignore
stale re-scans, with a longer wait for run registration before retry.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): record output trigger matches only after run starts
Propagate automation launch failures to output triggers and commit match
dedupe only once the session run is registered as active.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): address Codex review on wait cursor and sensitive codegen
Track scan offset so waitFor/waitForAny only match output after the previous wait, and emit sendLine after sensitive prompt in recorded scripts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): harden onOutput triggers against PTY echo and local input
Filter server output before pattern matching so onOutput fires only after
Enter on real stdout, not on keystroke/paste echo, OSC/SGR sequences, or
alternate-screen apps. Add dev diagnostics and scope triggers to the active
session when no explicit host targets are configured.
Co-authored-by: Cursor <cursoragent@cursor.com>
* chore(scripts): remove onOutput trigger debug logging
Drop temporary diagnostics module and console traces now that PTY echo
filtering is verified; keep the production trigger pipeline unchanged.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(terminal): add remote command history side panel
Read remote shell history over SSH/ET/Mosh exec channels, browse it in a virtualized side panel with search, paste, and save-as-snippet actions. Closes#1381.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(history): expand command detail inline below selected row
Move the detail strip from a fixed slot above the list into the row
immediately below the clicked entry so expansion reads top-to-bottom.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(history): filter Netcatty AI PTY commands from remote history
Drop shell history lines containing the __NCMCP_ marker so AI exec noise
does not clutter the command history panel.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(history): tighten detail strip and add run action
Size the expanded row to its content, add a run-in-terminal button, and
use clearer snippet icon/tooltip for save-as-snippet.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(history): address review findings before merge
Key cache by host+session, retry Mosh pending reads, and clamp virtual
list scroll position when filtered items shrink.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
The terminal-side ScriptsSidePanel was the surface the #780 reporter
was actually looking at when they asked for right-click delete/modify
on snippets. PR #783 closed the issue by adding a trash icon in the
Vault edit panel, but the sidepanel snippet rows were still plain
<button>s with no context menu — so the original complaint
("右键可以弹出一个菜单, 可以包含'删除, 修改'等操作") remained unaddressed
at the exact spot the screenshot came from.
Changes:
- ScriptsSidePanel: wrap each snippet row in a ContextMenu with Edit
and Delete items. Menu actions dispatch window events instead of
threading new callbacks — matches the existing netcatty:snippets:add
pattern the + button already uses.
- QuickAddSnippetDialog: accept an optional onUpdateSnippet prop and
listen for netcatty:snippets:edit. Prefills label/command/package
from the dispatched snippet, and on save preserves the snippet's
original tags/targets/shortkey/noAutoRun (the dialog only exposes
the three quick-edit fields). Title flips to snippets.panel.editTitle
in edit mode.
- App.tsx: pass onUpdateSnippet wired to updateSnippets(map-replace),
and register a window listener for netcatty:snippets:delete that
filters the deleted id out of snippets. Delete needs no UI so it
doesn't go through a dialog.
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The previous "+" flow in ScriptsSidePanel switched the active tab to
Vault and jumped to the Snippets section, which ripped the user out
of their current terminal context — exactly what the feature was
supposed to avoid.
Replace the cross-panel navigation flow with a lightweight modal
dialog mounted at the App root:
- New component QuickAddSnippetDialog renders over everything and
owns its own form state. Fields: label, command (multi-line), and
package (combobox with allowCreate).
- App.tsx mounts the dialog globally and wires it to updateSnippets /
updateSnippetPackages. No prop drilling through TerminalLayer.
- ScriptsSidePanel still dispatches the same netcatty:snippets:add
window event; the dialog listens for it and opens in place.
- Reverted the navigateToSection / pendingSnippetAdd / openAddTrigger
plumbing in App.tsx, VaultView, and SnippetsManager.
Advanced fields (targets, shortkey, tags) can still be set later
via the full Snippets manager. Cmd/Ctrl+Enter saves from any field.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
bincxz