* fix(hosts): keep draft connect scripts before onConnect promote
Host details queue editing pruned non-onConnect scripts immediately, so
default manual automation scripts could be selected but never appeared
in the queue. Keep an editable draft queue and only prune missing IDs
until save promotes triggers.
Closes#2705
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): promote persisted manual connect-queue scripts on save
Editable queue retention left already-saved manual script IDs unpromoted
when reopen/save compared only newly added IDs. Promote every queued
script that still needs onConnect + host targeting.
Co-authored-by: Cursor <cursoragent@cursor.com>
* chore(hosts): drop unused HostDetailsPanel snippet imports
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): do not demote global scripts during queue save sync
Promote-on-save must leave targetsAllHosts onConnect scripts unchanged
when they appear in a host connectScriptIds list.
Co-authored-by: Cursor <cursoragent@cursor.com>
* test(hosts): cover global connect scripts during queue save sync
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): promote connect-queue scripts on new host save
New hosts have no initialData, so queue promote-on-save was skipped and
manual scripts stayed non-onConnect after the first save.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): harden connect-queue promote against Codex review
Preserve global scope when promoting manuals, skip re-promoting scripts
demoted while the host editor is open, sync peer host queues for retained
targets, and keep test fixtures ASCII-only.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): persist peer connect queues with edited host save
Peer queue sync via onHostsChange was overwritten by onSave rebuilding
from a stale hosts snapshot. Write peers+edited host together and make
save paths apply functional host updates.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): keep connect queues across hydration and concurrent edits
Skip queue rewrite while snippets are still empty, and do not promote
entries whose non-onConnect trigger changed while the host editor stayed
open.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): skip connect-queue rewrite before snippets hydrate
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): preserve concurrent target removals and merge peer deltas
Drop stale queue entries when targets were unlinked while editing, and
apply peer connectScriptIds updates via functional host state merges.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): hydrate connect-queue baseline and append peer deltas
Capture the first hydrated snippet catalog as the editor baseline, and
merge peer queue updates by appending only newly queued script IDs.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): snapshot opening queue and keep peer updates host-safe
Use the editor-opening connect queue as sync previous IDs, and never
overwrite the edited host inside peer delta merges.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): clear deleted queues after hydrate and honor manual unlinks
Treat a hydrated empty snippet catalog as ready for queue reconciliation,
and drop concurrently untargeted non-onConnect queue entries on save.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hosts): clear loginScriptId when connect queue is emptied
sanitizeHost reconstitutes connectScriptIds from loginScriptId when the
explicit queue is absent, so clearing the last queued script must also
drop the legacy field.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(scripts): add terminal script automation, recording, and side panel
Introduce nct script runtime in the main process with terminal-side recording,
execution overlay, Monaco editor, connect-script queues, and scripts side panel
integration. Fix recording to wire scriptRecorderRef into xterm, use waitForPrompt
for root/user shells, and save recorded scripts through the global editor dialog.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): address Bugbot review findings for recording and side panel
Refresh script run state in side panel memo, guard toolbar recording against
multi-session conflicts, reset connect scripts on reconnect, resolve focused
session via getActiveTerminalSessionId, and avoid wiping host edit form when
snippets list updates.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): prevent pending script re-run and improve workspace run feedback
Track one-shot pendingScript execution separately from onConnect queue so
reconnects do not replay Run-now scripts. Fall back to focused session when
running on all tabs outside a workspace, and toast when every tab is still
connecting.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): consume connect-script window once and filter serial hosts
Mark the onConnect script evaluation as consumed even when the queue is
empty so later snippet/host edits do not rerun automation mid-session.
Restore serial-host filtering in SelectHostPanel confirm handler.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): grace period before giving up on connect-script queue
Only mark onConnect automation as consumed after scripts run or a short
post-connect grace window expires, so late-loading snippets still trigger
while mid-session Vault edits do not.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): gate connect-script consumption on vault hydration
Replace the grace timer with vault-init and unresolved host script binding
checks so late-loading snippets still run onConnect automation while
mid-session edits stay suppressed. Clear pending script run state on
disconnect so reconnect retries workspace pending scripts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): honor run targets and retry failed connect automation
Route QuickScriptEditorDialog Run through onRunSnippet for multi-host
workspaces. Defer connect/pending script completion markers until each
script succeeds and retry the queue after failures.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): stabilize pending runs and global connect queue sync
Keep pending script run state across reconnects, run onConnect scripts
before one-shot workspace pending scripts, and strip per-host queue entries
when an onConnect script targets all hosts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): defer host queue snippet sync and guard connect runs
Persist snippet target links only when the host panel is saved, block
duplicate connect-script scheduling while a batch is running, and require
runnable hosts before showing Run in the snippets editor footer.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): retry connect failures and surface output-trigger errors
Use a retry tick in connect-script effect deps, toast automation failures
from output triggers, and require runnable hosts before QuickScript Run.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): track id-less pending runs and re-arm output triggers
Remember anonymous pendingScript objects after first run and allow
onOutput triggers to fire again when new terminal output arrives.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): unblock paused connect runs and pass session meta
Resolve waitForScriptRun on pause, run workspace scripts per session
with hostname context, defer output-trigger arming until runs start, and
add noRunnableHosts i18n for QuickScript Run.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): serialize output triggers and defer empty connect finalize
Fire at most one onOutput trigger per scan while a run is active, and
only finalize an empty connect queue after vault snippets are loaded.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): guard output launch race and script run waits
Block overlapping onOutput launches, timeout stuck waitForScriptRun
promises, and disable vault Run when no connectable targets exist.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): match output triggers on new chunks only
Scan onOutput patterns against recent terminal output instead of buffer
length dedupe, and restore overflow-visible on SelectHostPanel new-host flow.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): await sequential workspace runs and output launch
Wait for each tab script to finish in sequential workspace mode, and hold
output-trigger launch guard until the session run becomes active.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): wait through pause and hold output trigger until done
Keep connect and sequential workspace queues blocked until scripts
complete or fail, and retain output-trigger guard until the launched run
finishes.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): harden output trigger wait helpers
Add explicit timeouts to output-trigger wait helpers and stop rescanning
the buffer after script completion to avoid sticky-match rerun loops.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): allow empty connect queue and match output in new chunks
Treat an empty connectScriptIds array as an explicit cleared queue instead
of re-migrating from snippet targets, and only fire onOutput triggers when
the latest terminal output contains the pattern.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): require fresh output overlap for onOutput triggers
Only fire output-matched scripts when the regex match extends into the
latest terminal chunk, preventing reruns from stale buffer text.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): promote manual scripts added to host connect queue
Diff connect queue changes from raw connectScriptIds so saving a host
updates manual scripts to onConnect when they are newly queued.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): dedupe output triggers by match position
Track the buffer end offset of each output trigger match and ignore
stale re-scans, with a longer wait for run registration before retry.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): record output trigger matches only after run starts
Propagate automation launch failures to output triggers and commit match
dedupe only once the session run is registered as active.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): address Codex review on wait cursor and sensitive codegen
Track scan offset so waitFor/waitForAny only match output after the previous wait, and emit sendLine after sensitive prompt in recorded scripts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): harden onOutput triggers against PTY echo and local input
Filter server output before pattern matching so onOutput fires only after
Enter on real stdout, not on keystroke/paste echo, OSC/SGR sequences, or
alternate-screen apps. Add dev diagnostics and scope triggers to the active
session when no explicit host targets are configured.
Co-authored-by: Cursor <cursoragent@cursor.com>
* chore(scripts): remove onOutput trigger debug logging
Drop temporary diagnostics module and console traces now that PTY echo
filtering is verified; keep the production trigger pipeline unchanged.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
yintian